- +39 049 900 62 11
- info@gruppocommit.it
The Commit Group specializes in processing and marketing of galvanized steel in coils, strips and sheets to standard and custom sizes. These products consist of a steel substrate over which a coating consisting of aluminum (90%) and silicon (10%) is applied by continuous hot dipping. Their main characteristic lies in their excellent resistance at high temperatures: the surface remains unaltered up to 450°C and the 80% heat reflection is crucial when producing heat shielding.
Excellent corrosion protection capability is provided by the aluminum, which, in contact with oxygen in the air, forms a passivating oxide layer.
| Name | Type of coating | Yield strength | Rupture | Elongation | Plastic deformation ratio | Cracking | |
| Quality | Type of coating | Re MPag | Rm MPag | A80 % min | r90 min | n90 min | |
| DX51D | +Z, +ZF, +ZA, +ZM, +AZ, +AS | – | 270 to 500 | 22 | – | – | |
| DX52D | +Z, +ZF, +ZA, +ZM, +AZ, +AS | 140 to 300 | 270 to 420 | 26 | – | – | |
| DX53D | +Z, +ZF, +ZA, +ZM, +AZ, +AS | 140 to 260 | 270 to 380 | 30 | – | – | |
| DX54D | +Z, +ZA | 120 to 220 | 260 to 350 | 36 | 1,6 | 0,18 | |
| DX54D | +ZF, +ZM | 120 to 220 | 260 to 350 | 34 | 1,4 | 0,18 | |
| DX54D | +AZ | 120 to 220 | 260 to 350 | 36 | – | – | |
| DX54D | +AS | 120 to 220 | 260 to 350 | 34 | 1,4 | 0,18 | |
| DX55D | +AS | 140 to 240 | 270 to 370 | 30 | – | – | |
| DX56D | +Z, +ZA | 120 to 180 | 260 to 350 | 39 | 1,9 | 0,21 | |
| DX56D | +ZF, +ZM | 120 to 180 | 260 to 350 | 37 | 1,7 | 0,2 | |
| DX56D | +AZ, +AS | 120 to 180 | 260 to 350 | 39 | 1,7 | 0,2 | |
| DX57D | +Z, +ZA | 120 to 170 | 260 to 350 | 41 | 2,1 | 0,22 | |
| DX57D | +ZF, +ZM | 120 to 170 | 260 to 350 | 39 | 1,9 | 0,21 | |
| DX57D | +AS | 120 to 170 | 260 to 350 | 41 | 1,9 | 0,21 | |
| g 1MPa = 1N/mm2 | |||||||
| Coating name | Minimum weight1) | Typical values of coating thickness per side in the single spot test | Density | ||
| g/m2 | μm | ||||
| Triple spot test | Single spot test | Typical value | Range | ||
| Weight of aluminum-silicon (AS) coating | |||||
| AS060 | 60 | 45 | 8 | 6-13 | 3,0 |
| AS080 | 80 | 60 | 14 | 10-20 | |
| AS100 | 100 | 75 | 17 | 12-23 | |
| AS120 | 120 | 90 | 20 | 15-27 | |
| AS150 | 150 | 115 | 25 | 19-33 | |
| 1) The g/m2 include both surfaces | |||||
A | Minor imperfections - such as small variations in grain size, dark spots, light scratches, and passivation spots - are possible |
B | It is obtained through skinpass. Small imperfections - such as scratches due to skinpass, streaks, irregularities (not cavities) - are possible with this kind of surface |
C | It is obtained through skinpass. The best surface does not harm the apparent uniformity of a high color finish class; the other surface must be at least type B |
C | Chemical passivation, traditionally chromium-based; also available free of trivalent chromium, in compliance with the RoHS Directive; greenish residues may remain on the surface that do not alter product characteristics |
O | Oiling using oils that can be removed during greasing without compromising the coating |
CO | Combination of oiling and chemical passivation to enhance the protective effect against corrosion |
S | Organic passivation, commercially referred to as AFP (Anti Finger Print) or SPT (Resin Coating), consisting of a polymer film containing corrosion inhibitors; available free of hexavalent chromium; improves corrosion protection, prevents fingerprinting, facilitates sliding during processing, and acts as a primer during painting |
P | Phosphating, particularly suitable for the application of a subsequent layer of paint |
PO | Combination of phosphating and oiling to improve formability |
U | Without any protection, under the customer’s responsibility |
• Heating
• Radiation
• Mufflers
• Hobs
They can be supplied with special requirements for coating finish, surface appearance and surface protection.
Whatever the type of protection, it is very important that during transportation and storage, galvanized materials avoid contact with moisture or water as much as possible and are kept in a dry environment.
These steels are available in different ranges of properties, from commercial (DX51D) to deep drawing (DX54D, DX56D and S250GD) and high-strength grades (HX340LAD).
Surface protection can be of different types and must be appropriately indicated when placing the order. Surface appearance can be if type A, B or C.
Commit Siderurgica SPA
Via dell’industria, 23
35030 Veggiano (PD)
VAT no. 01958150284
Commit Metalli SRL
Via volta, 69
35030 Veggiano (PD)
VAT no. 04678270283
